|
|
|
| Slide Hammer Puller Set |
|
For automotive body work, as well as pulling bearings, gears, and front wheel drive axle shafts. Kit contains 5-lb slide hammer assembly with tapered cone nut, tapping screw and adapter, special threaded adapter, hook, shoulder bolt and nut set, three pulling jaws, 2-jaw and 3-jaw yokes, and front ...
More
|
|
$40.00 - $90.00
from 4 stores
|
|
| K D Tools Slide Hammer Puller Kit 41700 |
|
This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: Shallow Flange Deep Flange Slide Hammer 2 Way Yoke 3 Way Yoke Center Bolt and Cone 3 P ...
More
|
|
$81.00 - $89.00
from 2 stores
|
|
| Stanley Bostitch H30 - 8 Powercrown Stapling Hammer |
|
Designed for repetitive tacking and light nailing jobs where speed is important, this compact yet powerful stapling hammer swings like a hammer. It drives 1/2" as well as 1/4" and 3/8" lengths. Highlights include one-hand operation; consistant staple penetration; and built-in shock absorber that cus ...
More
|
|
$30.00 - $48.00
from 2 stores
|
|
| Farberware 52 oz Compo Cast Hammer |
|
Dead-blow hammers are non-marring and come in handy when you want to reduce back-lash (or back-bounce) of a hammer. These hammers have a non-sparking soft face and no exposed metal. The soft face prevents marring of surfaces or equipment. Dead blow hammers do not absorb liquids. The dead blow fu ...
More
|
|
$48.00 - $50.00
from 3 stores
|
|
| Bosch 1/2" Variable Speed Hammerdrill |
|
6.7 Amp motor provides high performance and overload protection. Dual mode: hammerdrill/drill for wood, steel or masonry applications. 3.85 Lb. Lightweight design for extended use and less user fatigue. Two-finger trigger for increased comfort. 360 degree side handle with depth rod offers greater co ...
More
|
|
$95.00 - $193.00
from 8 stores
|
|
| Vaughan Milled Face Curved Hickory Handle |
|
Vaughan Ti-Tech Framing Titanium Wood Handle Hammer. Ti-Tech combines the high-speed driving power of titanium with the versatility of interchangeable steel caps. Lightweight body swings faster for greater power at point of impact. Anti-vibration handle and free floating pin to reduce sting of impac ...
More
|
|
$85.00 - $93.00
from 3 stores
|
|
| Mayhew 42 S 42 Inch Straight Dominator Pry Bar |
|
Patented two composite ergonomically designed handle provides maximum comfort and secure grip Capped end in direct contact with shaft allows user to strike the pry bar without handle damage Shaft goes through handle for prying power Hardened and tempered the entire length for maximum durability 42" ...
More
|
|
$57.00 - $59.00
from 2 stores
|
|
| Seventeen Pocket Combination Tool Pouch, 5 Pc |
|
Totally versatile, all parts removable and interchangeable. Constructed of double layered, rugged lightweight nylon. 8 Main nail/tool pockets and 7 smaller pockets for pliers, nail sets, pencils, etc. Leather pry bar and combination square holder. Never close feature with jumbo gusset allows increas ...
More
|
|
$92.00 - $99.00
from 1 store
|
|
| Stanley 42 oz. Compo Cast Hammer |
|
Dead-blow hammers are non-marring and come in handy when you want to reduce back-lash (or back-bounce) of a hammer. These hammers have a non-sparking soft face and no exposed metal. The soft face prevents marring of surfaces or equipment. Dead blow hammers do not absorb liquids. The dead blow fu ...
More
|
|
$37.00 - $53.00
from 3 stores
|
|
| Lisle Ball Joint / Tie Rod / Pitman Arm Seperator Set |
|
41500Pickle Fork KitFeatures and Benefits:For separating ball joints, tie rods, Pitman arms and other uses.Six tools in one for exceptional versatility and value.Kit consists of three forks and two handles; one for hammering, the other for use with an air hammer (.401" shank).All forks are threade ...
More
|
|
$34.00 - $55.00
from 3 stores
|
|
| DeWalt 1/2 Hammer Drill DW511 |
|
Features: 6.7 Amp motor provides high performance and overload protection Dual mode: hammerdrill/drill for wood, steel or masonry applications 3.85 lbs. - lightweight design for extended use and less user fatigue Two-finger trigger for increased comfort 360° side handle with depth rod ...
More
|
|
$100.00 - $130.00
from 3 stores
|
|
| Ppp Cpvc 750, 3/4" Npt Water Hammer Arrestor, Grey |
|
PPP CPVC-750, 3/4" NPT Water Hammer Arrestor, Grey Arrestor construction: Adapter, Cap, Piston, and Barrel made from CPVC schedule #80 materials. "O" rings are Parker Nitrile Buna N compound. Pigmented CPVC conforms to ASTM Standard 1784 for materials and F-441 for pipe. CPVC (Hi-Temp) - Type IV G ...
More
|
|
$71.00 - $71.00
from 2 stores
|
|
