|
|
|
| Porter Cable - Cable Factory - Reconditioned 1 3/4 Peak HP Router 690LR |
|
Features 11 Amps, AC only, 27,500 RPM, 1/4" & 1/2" collets, Auto-release collet system ends "frozen" bits, Precision machined aluminum motor housing & base, Accurate micrometer depth-of-cut adjustment to 1/128, 100% sealed ball bearings, Dust-sealed switch, Lever release height adjustment, Under tab ...
More
|
|
$107.00 - $150.00
from 6 stores
|
|
| Bosch Power Tools Routers Plunge Routers |
|
Features Converts easily for use with router table and back to upright use Bosch exclusive system defeats both plunge lock and plunge springs for effortless depth adjustments in router table 334 base opening and 2 subbase opening Accepts large bits Coarse and microfine adjustment knobs plus depth ro ...
More
|
|
$220.00 - $370.00
from 8 stores
|
|
| Porter Cable 6931 Plunge Router Base For 693 |
|
Adds plunging capability for safer, more convenient operation Six position depth stop allows repeatable cutting depths Fully enclosed springs ensure smooth operation through the 2-1/2-inch plunge range Compatible with motors from Porter-Cable routers 690, 9690, and 691 for versatility One Year Warra ...
More
|
|
$88.00 - $120.00
from 4 stores
|
|
| Porter Cable - Cable Laminate Trimmer 309 |
|
Features 3.8 Amps, AC/DC, 28,000 RPM, 1/4" collet, Double sealed ball bearing construction, Compact, lightweight, one-hand control, Flat top design permits safe, easy "up-right" bit changes, Non-marking plastic base offers full support. Includes Trimmer motor, Base, Wrenches #44745, Operating manual ...
More
|
|
$130.00 - $141.00
from 4 stores
|
|
| Dewalt DW625 3.0-HP Heavy Duty Vs Electronic Plunge Router |
|
Features: 15.0 Amp motor uses state of the art circuitry for soft starts and smooth operation. * Full wave electronic variable speed motor runs at 8,000-22,000 rpm with constant speed under load to ensure a quality finish in all materials. * Rack and pinion depth adjuster, magnified scale and micro- ...
More
|
|
$258.00 - $280.00
from 4 stores
|
|
| Bosch PR10E Colt Single Speed Palm Grip Router |
|
5.7 amp Motor with 35,000 RPM Rugged Aluminum Fixed Base - Durable, solid and precise Fast & Precise Depth Adjustment System - The best depth adjustment system in its class Unique Finger Support Pockets - For additional stability, especially when trimming edges Enhanced Bit Capacity - Fixed Base acc ...
More
|
|
$69.00 - $115.00
from 8 stores
|
|
| Porter Cable - Cable 1 3/4 Peak HP Router Kit 693LRPK |
|
Features 11 Amps, AC only, 27,500 RPM, 1/4" & 1/2" collets, Auto-release collet system ends "frozen" bits, Precision machined aluminum motor housing & base, Accurate micrometer depth-of-cut adjustment to 1/128, 100% sealed ball bearings, Dust-sealed switch, Lever release height adjustment, Under tab ...
More
|
|
$180.00 - $386.00
from 8 stores
|
|
| Dewalt D - Handle Base for DW616/618 Routers - DW6183 |
|
DeWALT D-Handle Base for DW616/618 Routers - DW6183 D-Handle Base for DW616/618 Routers Product Features Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location Adjustable, tool-free steel motor cam ...
More
|
|
$84.00 - $110.00
from 4 stores
|
|
| Porter Cable 1 - 3/4" Hpfb Router with Case |
|
For the woodworker who demands precision, this heavy-duty fixed router fits the bill. A finely-tuned micrometer allows for cut adjustments in increments of 1/128 In. and an under-table stop prevents the motor from rotating out of base. There's even a dust seal on the switch to keep everything in goo ...
More
|
|
$120.00 - $312.00
from 7 stores
|
|
| Bosch 10A 2 3/4HP Routercombo |
|
10A, 2-3/4 HP, Router Combo Kit, Fixed & Plunge Based System Kit, 1/4" & 1/2" Collet Capacity, Variable Speed Dial, Patented Comfort Grip Handle System, Ergonomically Designed Soft Grip, Touch Activated Work Light, Case, Flip & Push Bit Change System & Collet Lock, Auto Zero.
|
|
$95.00 - $119.00
from 5 stores
|
|
| Delta X5 3Hp Heavy Duty Shaper |
|
X5 3HP HEAVY DUTY SHAPER : With its industrial fence assembly, the DELTA X 5 Model 43-495X 3HP Heavy Duty Shaper makes great results easy to produce: 230V, 3HP, 1PH motor - 3/4" dia. spindle with 3-1/4" capacity under nut, 3" travel. 7,000 and 10,000 RPM, forward and reverse. 8" cutting width, 5/8" ...
More
|
|
$2,499.00 - $2,500.00
from 7 stores
|
|
